MC-PQ800 Power Quality Analyzer Host

MC-PQ800 Power Quality Analyzer Host

Model: MC-PQ800 Quantity: 1 set Manufacturer: Hubei MECI Electric Power Equipment Co., Ltd

Category: Power Quality, Harmonic Analyzer

Keywords: MC-PQ800 Power Quality Analyzer Host

Product Overview

Product Features

  1. Four-channel voltage and four-channel current inputs.
  2. Test parameters: system frequency, RMS values and phase angles of voltage and current; single-phase active power and the active power of each of the three phases, as well as single-phase reactive power and total reactive power; single-phase apparent power and total apparent power, single-phase power factor and total power factor. Positive and negative active energy for phases A, B, and C, and total active energy for all three phases. Positive and negative reactive energy for phases A, B, and C, and total reactive energy for all three phases; voltage unbalance and current unbalance; voltage deviation and frequency deviation for each phase; 2nd to 50th harmonics of voltage and current for each phase; voltage transients and current surges.
  3. Real-time harmonic data assessment: The instrument is equipped with built-in national standard harmonic limits, enabling accurate, real-time determination of whether the measured voltage and current harmonics are within acceptable limits or exceed them.
  4. Communication Interfaces: This device is equipped with two USB ports—one for inserting a USB flash drive to store data, and the other for communicating with a computer to enable real-time data transmission and analysis.
  5. Multiple graphical displays: A 5.5-inch blue LCD screen provides intuitive real-time data visualization, including waveform plots, spectrograms, and vector diagrams.
  6. It can also measure the voltage and RMS current of the neutral wire.
  7. Easy to use: compact size (320 x 280 x 135 mm), lightweight, and equipped with a high-performance lithium battery that enables up to 6 hours of continuous operation without an external power source.

Technical Specifications

1) Fundamental voltage error: ±0.2%

Voltage deviation error: ±0.2%

2) Fundamental current error: ±0.5%

3) Frequency deviation error: ±0.01 Hz

Frequency measurement range: 40 Hz to 60 Hz

4) Three-phase unbalance: absolute error of voltage unbalance is 0.2%.

Absolute error of current imbalance: 1%

0.5% for each sequence component of voltage and current

Related Products

New Product Recommendations

Product Center

Power Quality, Harmonic Analyzer

Metrological verification device

Relay Protection Tester

Transformer Testing

Capacitors and Generators

Product Inquiry

Leave your contact information to receive a free product quote.

Submit Message