MCG-103DG Optical Digital Relay Protection Tester

MCG-103DG Optical Digital Relay Protection Tester

Model: MCG-103DG Quantity: 1 set Manufacturer: Wuhan Huadian Keyi Electrical Co., Ltd.

Category: Relay Protection Tester

Keywords: MCG-103DG Optical Digital Relay Protection Tester

Product Overview

Product Features

Technical Specifications

Model No.

MCG-103D(G)

Number of optical ports

8 fiber optic Ethernet ports + 3 fiber optic serial ports

Fiber optic network port

100Base-FX (100 Mbit, multimode fiber, full-duplex)

Port Type: ST Transmission Distance: >1 km

Supported protocols: IEC 61850-9-1, IEC 61850-9-2 (including point-to-point), GOOSE

Performance: A single optical port can simultaneously output 10 sets of SMV messages and 16 sets of GOOSE messages.

Supports linkless transmission

Transmission uniformity error < 0.1 µs

Message timestamp marking error < 0.1 µs

Fiber Optic Serial Port

2M–10M multimode fiber

Port Type: ST Transmission Distance: >1 km

Supported protocols: IEC 60044-8 extended frame, State Grid extended frame, and XJ Electric proprietary

Performance: Transmission uniformity error < 0.1 µs

Message timestamp marking error < 0.1 µs

Synchronous interface

Supported: GPS (built-in), PPS, IRIG-B (DC), IEEE 1588 P2P (or E2E)

Performance: GPS, PPS, and IRIG-B (DC) synchronous clock error < 1 µs

In the P2P mode of 1588, the clock synchronization error is less than 1 µs (with the 1588 interface multiplexed with the fiber optic network port).

Supports B-code transmission. Uses the GPS clock when a GPS signal is available; otherwise, it uses the internal clock.

Small-signal output

Number of channels: 12

Output type: voltage output (4–20 mA current output optional)

Amplitude output range: DC 0–10 V, AC 0–7.07 V; Amplitude accuracy: 0.1% × setpoint ± 1 mV.

Frequency range: 0–1000 Hz Frequency accuracy: 2 mHz

Phase range: 0° to 359.999° Phase accuracy: 0.1°

Closing angle accuracy: 0.1° Channel synchronization: <10 μs

Digital Input

Channels: 8 channels

Specifications: 10–250 VDC or dry contact, automatic identification

Resolution: 1 μs

Maximum measurement time: 4200 s

Digital Output

Channels: 8 channels (including 4 high-speed pairs)

Specification: Dry Contact

AC/DC breaking capacity: 0.5 A, 250 V

Power supply

AC: 176 V–250 V, Rated Frequency: 50 Hz

Weight

6Kg

Dimensions (W*H*D)

300 mm × 140 mm × 380 mm

Related Products

New Product Recommendations

Product Center

Power Quality, Harmonic Analyzer

Metrological verification device

Relay Protection Tester

Transformer Testing

Capacitors and Generators

Product Inquiry

Leave your contact information to receive a free product quote.

Submit Message